Staple Geotextile Durable and Corrosion-Resistant for Various Applications
Product Introduction
Staple fiber geotextile is a kind of water-permeable geosynthetic material made of synthetic fiber by needling or weaving. Its main raw material is polypropylene or polyester staple fiber, through opening, combing, clutter, laying nets and other processes to make cloth.
Product Properties
1. Water permeability: Even under earthwork pressure, it can maintain good water permeability.
2. Corrosion resistance: Due to the use of polypropylene or polyester and other chemical fibers as raw materials, so acid and alkali resistance, no corrosion, no moth, anti-oxidation.
3. Easy construction: light weight, easy to use.
Product Application
Staple fiber geotextile has a variety of uses, can be applied to water conservancy projects, DAMS, roads, airports and construction and other fields. It can be used as a material for isolation, drainage, filtration and protection. In addition, it can also be used in combination with geomembrane to form impermeable materials.
Product Specification
* Grams/㎡: 100g~800g/㎡
* Width:2m~6m
* Roll length:50m~100m
PS: Customized request accept for all above.
Product Specification and Technical Index (GB/T 17638—2017)
| Item |
Nominal Breaking Strength(KN/m) |
| 3 |
5 |
8 |
10 |
15 |
20 |
25 |
30 |
40 |
| 1 |
Breaking Strength (KN/m,≥,LD/TD) |
3.0 |
5.0 |
8.0 |
10.0 |
15.0 |
20.0 |
25.0 |
30.0 |
40.0 |
| 2 |
Elongation Rate (%,≥,LD/TD) |
20~100 |
| 3 |
Bursting Strength(KN)≥ |
0.6 |
1.0 |
1.4 |
1.8 |
2.5 |
3.2 |
4.0 |
5.5 |
7.0 |
| 4 |
Mass Deviation Rate Per Unit Area(%) |
±5 |
| 5 |
Width Variation ( ％) |
-0.5 |
| 6 |
Thickness Deviation Rate(%) |
±10 |
| 7 |
Sieve Size O90,O95 (mm) |
0.07~0.20 |
| 8 |
Vertical Permeability Coefficient (cm/s) |
Kx(10ˉ1-10ˉ3) K=1.0-9.9 |
| 9 |
Tearing Strength (KN,≥,MD/CD) |
0.10 |
0.15 |
0.20 |
0.25 |
0.40 |
0.50 |
0.65 |
0.80 |
1.00 |
| 10 |
Acid And Alkali Resistance (Strength Retention Rate)/%≥ |
80 |
| 11 |
Antioxidant Performance (Strength Retention Rate)/%≥ |
80 |
| 12 |
UV Resistance(Strength Retention Rate)/%≥ |
80 |
(GB/T17638-1998)
| Specification |
F100 |
F150 |
F200 |
F250 |
F300 |
F350 |
F400 |
F450 |
F500 |
F600 |
800 |
Remark |
| Item |
100 |
150 |
200 |
250 |
300 |
350 |
400 |
450 |
500 |
600 |
800 |
| Weight Variation (%) |
-8 |
-8 |
-8 |
-8 |
-7 |
-7 |
-7 |
-7 |
-6 |
-6 |
-6 |
- |
| Thickness (mm≥) |
0.90 |
1.20 |
1.70 |
2.10 |
2.40 |
2.70 |
3.00 |
3.20 |
3.60 |
4.10 |
5.00 |
|
| Width Variation ( ％) |
-0.50 |
| Breaking Strength (KN/m,≥,LD/TD) |
2.50 |
4.50 |
6.50 |
8.00 |
9.50 |
11.00 |
12.50 |
14.00 |
16.00 |
19.00 |
25.00 |
|
| Elongation Rate (%,≥,LD/TD) |
25-100 |
| CBR Burst Strength ( KN≥) |
0.30 |
0.60 |
0.90 |
1.20 |
1.50 |
1.80 |
2.10 |
2.40 |
2.70 |
3.20 |
4.00 |
|
| Sieve Size O90,O95 (mm) |
0.07-0.2 |
|
| Vertical Permeability Coefficient (cm/s) |
Kx(10ˉ1-10ˉ3) |
K=1.0-9.9 |
| Tearing Strength (KN,≥,MD/CD) |
0.08 |
0.12 |
0.16 |
0.20 |
0.24 |
0.28 |
0.33 |
0.38 |
0.42 |
0.46 |
0.60 |
|
1) Specifications according to the mass per unit area, the actual specification between adjacent specifications in the table,
according to the interpolation method to calculate the corresponding assessment index, if beyond the scope in the table,
shall be determined between supplier and the demander.
2) Unit Weight standards according to the design or agreement.
3) Width as reference indexes for internal control of production, the appraisal based on the actual design value if user raised
requests. |
Product Tags:
|
|
Erosion Control Staple Geotextile Road Fabric Corrosion Resistant 50m~100m Images
|
